Showing posts with label how to. Show all posts
Showing posts with label how to. Show all posts

Friday, October 15, 2010

How To Get The Best Value Out Of A Cheap Walmart Bike

Walmart sells some cheap, terrible bicycles. However, the cheapness and terribleness of Walmart bikes can be mitigated somewhat if you follow five simple steps when you buy a bike from Walmart.

1. Ride the bike around the store before you buy it: To me, if the bike doesn't even ride correctly when I'm in the store, there is no way that I'm paying money to take it out of the store. Specifically, before you buy a bike from Walmart or any of the other big box stores, check to see if a) both the front and rear brake work correctly and b) the bike shifts through all of the gears on both the front and the back. By far the easiest way to check this on a bicycle is to get on the bike and ride it down a couple of aisles. If it doesn't pass muster, look at another bike.

2. Take the bike to a shop and get everything checked and tightened: Before you ride the bike any further, I would take it to a local bike shop to get everything tightened and checked. The employees who assemble bikes for Walmart are usually the same people who assemble the patio furniture, meaning that they don't understand how a bicycle works mechanically or how tight they should tighten the bolts. The adjustments will likely only cost around 20 dollars or so, and it will save you from having dragging brakes, misaligned gears, etc. later.

3. Get the tires upgraded to road/hybrid tires: If you don't take your bike off-road at all and you want to spend about 30 or so dollars more, you can get the tires upgraded to road/hybrid tires. This will literally save you probably about 10-20% off your total trip time if you're riding on the highway or sidewalk. In fact, this is the easiest upgrade of which I am aware that you can make to a cheap bike that will make a significant, immediate impact on your commute time for a novice or average rider.

Well, I hope that this gives you some starting points for buying and making the most out of cheap bikes from a place like Walmart. Good luck riding!





Enhanced by Zemanta

Thursday, October 14, 2010

How to Beat Super Mario Bros. 3 in 11 Minutes

I just had to share this video about Super Mario 3. I used to think that I was bad arse when I played this game. Not so! This guy makes a speed run and beats the game in 11 minutes (ending with over 99 lives) and never even gets hit by an enemy. All that I can say is -- wow!


Enhanced by Zemanta

Tuesday, October 5, 2010

5 Ways to Make Money from Your Twitter Account

Many people are unaware that Twitter can be a powerful source of extra income each month. Here, I tell you the top 5 ways to make money from your Twitter account, including sponsoring tweets, selling your account, and more.

Foreword: The first thing that I'd like to point out is that all of the methods I'm going to mention here work much better if you have two things: a) A large number of followers and b) Followers who are highly interactive with your tweets. Depending on how interactive and focused your followers are, the level where your following is "large" can vary from person to person. However, as a general rule of thumb, I would highly recommend that you have a minimum of 2000 followers before you try to make money from your Twitter account. Generally, I personally don't worry about making money from my Twitter accounts until I have at least 5000 followers on the account if the account is targeted to a specific group or demographic and 10000 followers if it's not targeted. Here is an article where you can read more about easy ways to gain more followers on Twitter. 

Here are 5 ways to make money from your Twitter account:

1. MyLikes:MyLikes is a site that allows advertisers to use your Twitter account to send out tweets advertising a product. Basically, once you registers an account with MyLikes, you have the opportunity to approve tweets from different advertisers that will be sent out on your Twitter account. Once you approve a tweet, the tweet will be sent out (at a time approved beforehand by you) and the you are paid for every click on the ad by one of your followers. I only recently discovered the MyLikes website a couple of weeks ago, and I am pleased with the success I've had so far. The interface for their website is clean and easy to use, and payments are made weekly to your PayPal account, as long as you have at least two dollars or more in your account. Also, the payout rate can be up to $0.42 per click -- which is very generous in the world of advertising. Finally, MyLikes even has the option to double post your approved advertisements to a Facebook account or personal blog -- meaning that you have even more ways to earn money. All in all, MyLikes is like the Rolls Royce of methods to monetize your Twitter account. Click here to set up an account at MyLikes

2. Sponsored Tweets:Sponsored Tweets is another site that allows you to send out advertisements on your Twitter account and is very similar to MyLikes. The main differences are that you can't chose among a group of advertisers (as you can with MyLikes) and instead you have "offers" sent to your account and you can decide to approve or reject these offers. If you approve the advertiser offer, an advertisement is Tweeted out on your account and you are again payed for every click that your receive on your account. I am also very happy with Sponsored Tweets; although, I still like MyLikes a little better. The main difference for me is the fact that you can send out an advertisement on MyLikes whenever you want (instead of having to wait for ads to be offered to you by a sponsor). Even so, the opportunities to send out a sponsored tweet are very frequent (probably an average of 2-4 per day on my two Twitter accounts) and the money piles up quickly enough to keep me from complaining. Click here to read more or to set up a Sponsored Tweets account. 

3. Ad.ly: Ad.ly is yet another service, similar to MyLikes and Sponsored Tweets, that allows you to send out advertisements on your Twitter account. The main difference between Ad.ly and the previous two services that I've mentioned is that they don't have a pay-per-click program in place. Instead, after you've registered, your account will be placed in a database where advertisers can see your account name and a small profile of interests that you fill out when registering. Then, if an advertiser selects your profile, you will have the opportunity to start a "campaign" for that advertiser where you send out a specified number of tweets at regular intervals and the advertiser pays you a lump sum in return. I haven't personally tried Ad.ly, but I have friends who swear that it's the best way to make money online with your Twitter account.

4. Sell your tweets on Ebay / Craigslist: If you're still looking to make more money beyond what the other three services can offer you, you can always put an ad on Ebay or Craiglist where you sell some tweets to advertisers privately. I have had some limited success employing this method. My major complaint here, however, is that it's a lot of hassle; especially since I can make more money per time invested with MyLikes or Sponsored Tweets and have them do all the grunt work. Still, if you want to squeeze that last penny from your Twitter account, this might be a good second option for you.

5. Sell your Twitter account: If you're tired of using Twitter and don't want your account anymore, you could always consider selling your account to someone else. I've seen a large Twitter account (10000+ followers) on Ebay or Craigslist sell for as much as $500. Even a smaller account can sell for $20 to 50$, depending on how targeted the account followers are.
Enhanced by Zemanta

Monday, October 4, 2010

How to Use Silver to Purify Drinking Water

Clean drinking water...not self-evident for ev...Image via Wikipedia
First, let me start off the article by saying two things. First, I'm not a medical doctor. Use my advice at your own risk. Second, there are some risks associated with overexposure to silver, the worst of which is called argyria, which is basically a condition where the skin around your eyes, nails, and gums becomes discolored. Again, use my advice at your own risk.
 
Now that we have that settled, let me explain how to use silver to purify drinking water.

The process is pretty simple really. Basically, if you expose the drinking water to silver for a long enough time period, silver ions will disolve into the water. These silver ions will interact with the water to kill bacteria in the water. This process has been well known since the times of the Greeks and Phoenicians. In fact, the Phoenicians are said to have stored liquids in silver flasks to keep the liquids fresh for longer. More recently, the International Space Station also uses silver to purify drinking water.

The easiest way to purify your drinking water is simply to pour it into a silver flask, vessel, etc. and wait for a long time before drinking it. I'm not sure exactly how long you want to wait, but some of the sources that I've read suggest waiting about 3 days to make sure that the bacteria is dead.
If you want to wait a shorter period of time before drinking, you can speed up the introduction of silver ions into the water (and thus the purifying properties) by running an electrical current between two silver electrodes or by using "colloidal" silver. To use the electrolysis method, simply take two pieces of silver and use wires to hook them to the terminals of a battery. Then, place both pieces of silver close together (but not touching) in the water solution. Again, I'm unsure of the time that you have to wait until the water is safe to drink, but I would think that a few hours to a few minutes before drinking would be sufficient with this method. However, as I said, I'm not a doctor. Also, because I was unable to find the exact times that the silver should be in contact with the water before it's safe to drink, I recommend only using this method in an emergency.

If you want to use colloidal silver, you can purchase this at many health stores. Basically, colloidal silver is a mixture where microscopic silver particles are mixed in solution with a liquid. In these cases, carefully follow the recommendations of the solution maker as to how much of the colloidal solution you should mix in per liter of water.
Enhanced by Zemanta

Sunday, October 3, 2010

How to Move from Bronze to Silver League and Beyond in Starcraft 2 Multiplayer

A Terran marine depicted in StarCraft II ' s c...Image via Wikipedia
First, I want to start with a qualifier: I am by no means the next David Kim. Admittedly, I did play Starcraft: Brood Wars and the beta version of Starcraft 2, but I am not a pro player. However, I do have experience climbing through the bronze and silver league games (1v1), and I want to share a few tips to improve your game play enough to probably climb out of these levels.

1. Learn to use keyboard shortcuts: I really can't emphasize this point enough. If you're spending time clicking on individual buildings to make units, you're wasting a lot of time that could be spent either microing or macroing up your forces. Quiz: what are the hotkeys for a marine, zergling, zealot, stalker, etc? If you don't know, you should take the time to learn these if you want to advance your game.

2. Hotkey your production buildings and units: Again, if you're spending time during a battle clicking back to your main base to make more units, you're wasting valuable screen time that could be spent microing your units. Personally, I like to put all of the production buildings of a single type on a hotkey and the same types of units on the same hotkey. Let me give an example of how this would work in a game.

Lets say that I'm playing terran and I'm into the middle stages of a game and doing a banshee / viking / marine build. Also, lets say that I have 4 barracks (with 3 reactor cores and one tech lab), 1 factory (with a tech lab) and 4 starports (3 tech labs and 1 reactor core) supporting my build. In this case, I would put all of my barracks on one hotkey (usually 9), my factory on another hotkey (8), and all of my starports on a third hotkey (7). Additionally, I would have each of my troop groups on a different hotkey: in this case, my banshees on one hotkey (1), my vikings on a second hotkey (2), and my marines on a third hotkey (3). If I have some spell casters (say a raven), I would put these on a different hotkey (4). If you do this consistently, the macro and micro parts of the game will both become much, much easier in the long run.

3. Learn to micro your units: Starcraft 2 is all about two things -- building the right units at the right time and micromanaging those units. A lot, probably most, of the players in the bronze and silver leagues consistently forget to do the latter of those two tasks. Microing your units during a fight can literally make the difference between winning and losing the battle. For example, if you're playing terran and you reaper rush and your opponent has too many marines to handle, don't just let your units run into his marines and die. If you run your units around his base for long enough (and keep building new reapers at your main via the hotkeys discussed earlier), you WILL eventually have enough reapers to take out his marines (if he keeps only building marines), especially since reapers are a hard counter to marines. Remember: four marines versus two reapers is a battle you might lose. However, eight reapers versus 12 marines is probably an easy victory for you. Wait until you have the forces to win the battle decisively.

4. Learn unit counters: In Starcraft: Broodwars, you could basically build any unit you wanted in the middle and late game and, if your macro game was good enough, you could probably overrun your opponent, even if they were building counters to your units. For example, in Broodwars, I would sometimes get lazy as protoss and build nothing but dragoons all game long. Even with this dumb strategy, unless my opponent was zerg and building tons of zerglings, I would win a much larger percentage of the time than I deserved to win. However, you can't do this in Starcraft 2. In Starcraft 2, every unit has a counter to it. In other words, even if your opponent has an army twice the size of yours, you can win a battle easily if you have the right counter units. An example of this is a recent game where I played terran and saw that my opponent was building massive amounts of zerglings. I built up a force of about 18 reapers and put them at the choke point for my base. My 18 reapers took out something like 40 zerglings in about 5 seconds when my opponent decided to attack my base. Starcraft 2 has tons of these types of counters that make it impossible to win a game using macro alone against a smart player. Learn what those counters are and use them to your advantage.

5. Learn to scout: Part of successfully using counters in your game is scouting the enemy base. In my opinion, it is very hard to overscout the enemy base -- as long as you're getting good information in exchange for the price. If you can remember to actively scout your opponent's base all game long, you should see your level of play rise dramatically.
Enhanced by Zemanta

Friday, October 1, 2010

How to Beat the Char Level in StarCraft 2: Wings of Liberty

Kerrigan in concept art by Chris Metzen.Image via Wikipedia
How to Get Unstuck on the Hardest Level in the Game

Starcraft 2: Wings of Liberty is one of the hottest new games of 2010. However, the final level on the planet Char, where Jim Raynor faces his the evil zerg Queen of Blades is a nightmare for the inexperienced player. However, with a few modification in your game play, this level is possible to beat. Here are the steps to guide you through.

1. Build lots of choke point defense: The first task when you start this level is to build up your choke point defenses as much as possible. You should build at least 2-3 bunkers at each choke with supply depots in front of each. Also, you should siege up your tanks on the tops of the cliffs overlooking each choke point. If you do this, you will probably survive the first couple of minutes.

2. Use lots of SCVS to repair the front line defenses: Once your front line defenses are set up, you're going to want to use lots of SCVs at each choke point to repair those defenses. You need to have at least 6 SCVs at all times repairing if you expect to survive the waves of zerg attacking your front door. It's also useful to have a couple of medics around to heal the SCVs as they take splash damage from your siege tanks.
At this point, your strategy will diverge, depending on whether you took out the nydus canal network or the mutalisk next on the previous mission.

If you took out the nydus network:

3a. Build TONS of vikings: You are going to have massive waves of mutalisks attacking your position and the only mobile defense you'll have will be your faithful vikings. At all times, you probably need 3 squadrons of at least 12-16 vikings, each with 3-5 attached SCVs repairing them.

3b Build a wall of missle turrets: This will help kill any mutalisks that manage to make it through your valkyries. Any extra minerals you get should go to missle turret construction.

3c Use tanks to take out the Queen of Blades: During each of her attacks, focus your tanks down on her from the cliffs.

If you destroyed the mutalisk nest: 

4a Build TONS of banshees: You're going to really need these banshees, both to help hold your front door and to take out any nydus worms that pop out of the ground. I would recommend at least 2 groups of 12 at each of your front doors, with SCVs repairing them.

4b Immediately take out any nydus worms: If you let even a couple of these worms stay up, I promise that you WILL get overrun. Every time that a nydus canal pops up, it is top priority to use your banshees to kill it.

4c Use your banshees to kill Kerrigan: When she attacks, use all available banshees to kill that weirdo as fast as possible, your banshees should make quick work of her -- probably a 20 second or so kill at the max.

5. Don't be afraid to use mercenaries: If you have available mercenaries, use all of them up. They are a lot stronger than your regular troops, and money shouldn't be a problem in this level.
Good luck!
Enhanced by Zemanta

Thursday, September 30, 2010

Social Networks and Blog Promotion: Which Ones Work and Which Don't

19450025Image by jerandsar via Flickr
I have been using social networks now for about a year or so, and I have learned a lot of things: what works and what doesn't. Being that it's 2:30am here and I can't fall asleep, I've decided to share my secrets with you, my esteemed readers.
Here are the networks that work well to attract traffic, in the approximate order of how many followers they attract. Also, a small explanation of why the work (or not) is included to the side.
1. Twitter: In my opinion, Twitter is the "gold standard" when it comes to attracting traffic to your website. In general, I count on a minimum of about 1 viewer per 1,000 followers per day, assuming that I update regularly. If you have more engaged followers than I do, you'll probably have more hits from them too. In any case, Twitter is a godsend for blogging. I actually get about 33-50% of all my daily traffic from Twitter, and I only have about 20,000 followers.
2. Facebook: The Facebook account that I have associated with my blog is relatively newer, but I'm still seeing good results from the initial trials. With only about 200 friends, I'm seeing about 2 hits per day originating from Facebook -- results even better than Twitter per capita. Of course, if you have friends and family on your blog Facebook page (as opposed to strangers), I would expect that you would see higher traffic from this. However, Facebook is still below Twitter in my estimation because it's much harder to add new followers -- meaning that even a lower rate of click through from Twitter will win in the end through sheer volume.
3. Digg/Reddit: It depends on which "camp" you're in here (team werewolf vs. team vampire guy anyone?) but both services are marginally successful in driving traffic to a blog. Both have problems, however. In the case of Reddit, they like to block users who submit a lot of articles to Reddit from a blog, and they are difficult to deal with in general. Also, the interface sucks rocks. For Digg, they have a much cleaner interface and are much more lenient on submission, but they send a lot less traffic to a blog per article submitted. I guess which one (or preferably both) of these sites you use depends on your approach to blogging. More articles -- Digg is better. Fewer, higher quality articles -- use Reddit.
4. Myspace: In theory, this dying giant of a social network site should send lots of hits to my blog -- in theory. In practice, my 1,000 plus followers have generated very few hits for my blog -- probably because many of them no longer use the service.
5. Stumbleupon: I have blogger friends that swear by this, but I've never seen a large number of hits coming from that site. For each article I submit, I can usually expect a maximum of five hits to my blog from that site, I think that the problem here is that they receive such a high volume of article submissions that most of your articles are never "stumbled upon" by the site's bots.
In summary, all social networks are good to some extent to drive traffic to your blog, but some are better than others.
Enhanced by Zemanta

Wednesday, September 29, 2010

How to Get Lots of Followers on Twitter

Image representing Twitter as depicted in Crun...Image via CrunchBase
Twitter is a great medium for spamming people and spreading your message around the internet. However, some of your advertisement spam loses its effectiveness when you're only sending it out to five people, two of whom are Korean and don't know any English. So, here is the way to get more followers on Twitter, or pretty much any other social networking site.
1. Follow lots of people: For some reason, when you blindly follow people on a social networking site, about 1/4 to 1/2 of those people will follow you back. What this means is that the main way to get lots of followers on Twitter (or Digg, Facebook, Myspace, etc.) is to follow lots of people and wait for a return following. I wish that there was some secret that was trickier than this, but this is the main truth. Social networking sites know this, however; and they will often put blocks into their sites to limit the number of people you can follow to be no more than a certain percentage over the number that follow you. For example, Twitter limits this number to 10% -- meaning that, if you have 2000 followers, you can follow at most 2200 people. This leads me to my next point:
2. Use tools like Refollow and Twitter Karma to unfollow people who aren't following back: I know that for Twitter Refollow and Twitter Karma (Google search both to find the exact links) allow you to unfollow anyone who is not following you automatically. I'm not sure if these tools exist for other social media sites, but I'm not sure if these sites have the same following restrictions that Twitter has. In any case, both tools are very useful for getting tons of Twitter followers.
3. Promote your Twitter account on your blog, Facebook, etc.: If you already have a large following on a site like Facebook or your personal blog, you can stick a Twitter widget button on your page (again, Google search to find the address) to gain new followers. If you're only looking to increase your followers by a few dozen or a few hundred, this would be a good option for you. However, if you want followers in the thousands (which is very desirable on Twitter), this method will only take you so far.
4. Get your followers to give you shoutouts, retweets, and recommendations: Another good source to add a few dozen to hundred new followers is by having followers you know and trust give you shoutouts and recommendations to their followers. As with method 3, this can be tedious if you're looking to gain thousands of followers. However, if you're only looking for a few hundred, targeted followers, this method is as good as the three above.
Gaining Twitter followers is hard, but, with hard work and the tools mentioned above, it can be a smooth process.
Enhanced by Zemanta